SCALE CORROSION INHIBITOR

EAUCHEM Product – is a specially tailored liquid form Scale and Corrosion Inhibitor for all types of boilers. It is a food grade and on-toxic organic product. It will help to reduce the percentage of blow down in boiler to a great extent. It will also prevent corrosion in vapour phase and condensate return lines.

Advantages

• Single product for total control of scale corrosion
• Helps to reduce blow down and thus saves water, fuel.
• Prevents corrosion in water phase, steam phase and condensate return lines
• Removes even existing scales from the boiler

Advantages
• Single product for total control of scale corrosion

Advantages
• Single product for total control of scale corrosion
• Helps to reduce blow down and thus saves water, fuel.

Oxidizing Biocides, Non-Oxidizing Broad Spectrum Biocides

EAUCHEM Product (Powder) - A broad spectrum biocide best in its kind for the control of visible algae, fungi and slimes build up in cooling water systems. It is SPCP based, biodegradable and foaming causing in nature. It is very effective in wide range of pH and temperatures.

Dosage

Eauchem product dosages depend upon the cooling water system details, operating conditions and the makeup water quality. Our experts will give guidelines for the dosing methods of the product and its related monitoring procedures when they implement the treatment programme.

Handling
• Eauchem cooling water treatment chemicals can cause irritation on contact with skin or eyes hence proper care should be taken like wearing gloves and goggles while handling this product. For further details please refer product M.S.D.S.
• Eauchem can be stored in any store rooms with proper ventilation
• Special care should be taken while handling this product

De–alkalizers Descalants

EAUCHEM Product - A descaling product in liquid form to remove carbonate, oxide deposits and non-silica deposits. It contains a neutralizer, accelerator and corrosion inhibitor in its formulation. It is extensively used in MS systems. It is based on HCL. Special care should be taken while handling this product.

Dosage

Eauchem product dosages depend upon the cooling water system details, operating conditions and the makeup water quality or holdup volume of the system to be descaled, nature and thickness of the scale. Our experts will give guidelines for the dosing methods of the product and its related monitoring procedures when they implement the treatment programme.

Handling
• Eauchem Product can cause irritation on contact with skin or eyes hence proper care should be taken like wearing gloves and goggles while handling this product. For further details please refer product M.S.D.S.
• Eauchem can be stored in any store rooms with proper ventilation
• Special care should be taken while handling this product

Silica Dispersants, General Dispersants, Bio-Dispersants

EAUCHEM Product is specially tailored silica dispersant formulated for the cooling water systems to prevent colloidal silica fouling and it also prevents silica scale in the system by the dispersive action. It also helps to improve corrosion inhibition by removing foulants which impede inhibitor-metal contact. It completely prevents magnesium silicate and calcium silicate scales.

Advantages
• Eauchem Product even cleans already fouled system gradually by its penetrating action by breaking the bond structure of the foulants.
• The Polymeric organic compound in the product keeps the suspended organics in suspension which will be removed during bleed-off.
• It also enhances the performance of biocides.
• It has excellent chemical and thermal stability
• It helps to keep heat transfer surfaces very clean for maximum heat transfer

Dosage
• EAUCHEM Product dosage depends on recirculation water, severity of fouling and operating parameters.
• Product should be dosed in cooling tower basin, where maximum turbulence is prevailing.
• Company will provide assistance in arriving optimum dosage for the system.

Herbal Based Scale And Corrosion Inhibitor Cum Biocide

EAUCHEM Product – is a specially tailored liquid form product to prevent scale, corrosion and microbiological problems in all types of cooling water systems. It is capable of preventing corrosion in all types of metallurgy in the Cooling Water systems. It will help you to run your Cooling Water system with zero blows down. It is a food grade non-toxic organic product.

Advantages
• Single product for total control of scale, corrosion and microbiological problems.
• No need for any usage of Dealkalizers like Hydrochloric acid and Sulphuric Acid for pH and alkalinity control.
• Helps to achieve Zero-bleed-off in cooling water system, thus saving huge quantity of water.
• Removes even existing scales and slimes from cooling water systems.
• EAUCHEM Product is eco friendly, biodegradable and user friendly product which is easy to use.
• Helps to reduce hydraulic and organic load into the Effluent Treatment Plant because of Zero bleed off from the Cooling Tower.

Dosage
• For every 1.0 kg of TDS in the cooling tower makeup 0.8 kg of this product is recommended.

Handling
• EAUCHEM Product can be stored in any store room with proper ventilation and under roof.

New Cooling Water System Pre - Cleaning Chemicals

EAUCHEM Product is a ter-polymer based general dispersant specially formulated for the cooling water systems to prevent fouling and it also prevents formation of mineral scales in the system by the dispersive action. It also helps to improve corrosion inhibition by removing foulants which impede inhibitor-metal contact. It also disperses silt and other suspended solids.

Advantages
• EAUCHEM Product even cleans already fouled system gradually by its penetrating action by breaking the bond structure of the foulants.
• The Polymeric organic compound in the product keeps the suspended organics in suspension which will be removed during bleed-off.
• It helps to keep heat transfer surfaces in a clean manner.
• It prevents phosphates, silicates, metallic oxide scales in the system.

Dosage
• EAUCHEM Product dosage depends on recirculation water, severity of fouling and operating parameters.
• EAUCHEM Product should be dosed in cooling tower basin, where maximum turbulence is prevailing.
• Company will provide assistance in arriving optimum dosage for the system.

Passivating Chemicals, Acid Inhibitors

EAUCHEM Product is an organic, liquid inhibitor meant to inhibit the attack of Hydrochloric Acid on iron and steel industries during cleaning operations. It does not contain arsenic, chlorinated hydrocarbons or lead compounds.

The addition of EAUCHEM Product to HCL acid provides maximum protection to equipment during removal of deposits and scales in boilers, piping systems, evaporating equipment in utility companies, refineries, paper mills, chemical plants and other industries.

Cooling Water Treatment Tablets

EAUCHEM Product is multifunctional water treatment programme in a single, easy to use tablet. It has been specially developed for use in small cooling systems (typically less than 100 RT-recirculation tonnages) with low or no water treatment service in place. EAUCHEM Product is an effective multifunctional treatment for algae, bio-fouling, inorganic deposits and yellow metal corrosion problems.

Advantages
• It is easy to use – no dosing pump required. Simply suspend tablets in the cleaning / flushing water or in a convenient area of water recirculation.
• EAUCHEM Product can be used in long and short half life systems.
• EAUCHEM Product tablets do not contain oxidizing biocide so eliminate corrosion problems associated with over use of oxidizing biocides.
• EAUCHEM Product solid tablet form means there are no liquid spill hazards and no powder dust problems.
• It eliminates the need to transport heavy palls and drums to the top of buildings.
• It removes the concerns and cost of safe disposable of palls and drums.

Dosage
• 1 tablet (200 grams) of EAUCHEM Product for every 1m3 of holdup volume of cooling water system.
• Start-up treatment programme: If system is in a fouled condition then in that case, for every 1 m3 of holdup volume suspend 2 to 3 tablets directly under the flushing water to rapidly establish the required chemical concentration for effective treatment.
• If system is new or cleaned before chemical treatment, place one tablet for every 1 m3 of holdup volume in an area where water is moving or agitated. Typically tablets will take minimum 2 to 3 weeks to dissolve under these conditions.
• Tablets should be replenished every time the water in the cooling system is replaced ie. Every month on small cooling systems with no blow down.

Safety and Handling
• In accordance with best safety practice, handle with care. Further details on safety and handling are available in the material safety data sheet for this product.